Before you finalize your door order, you need to understand the flush door price properly — not just the per-door quote, but what that price actually includes. Thickness, core material, grade, and finish all change the number significantly. Two doors quoted at the same price can perform very differently over five years.
This guide covers flush door prices across sizes, types, and designs — with enough detail to help you decide without second-guessing later.
Why Flush Door Price Matters?
Most people either overspend on decorative doors they don’t need, or underspend on internal doors that start warping after two monsoon seasons.
Flush doors are practical and available across a wide price range. Getting the price-to-quality equation right means your doors stay square, stay smooth, and don’t need early replacement.
The flush door price you pay depends on four things: core material, thickness, size, and surface finish. Change any one of them and the price shifts noticeably.
Flush Door Price in India (Quick Overview)
Here is a general price range for flush doors across types in 2026:
| Door Type | Price Range (Per Door) |
| Hollow Core Flush Door | ₹800 – ₹2,000 |
| Solid Core Flush Door | ₹2,500 – ₹6,000 |
| Waterproof Flush Door | ₹3,500 – ₹9,000 |
| Decorative / Designer Flush Door | ₹4,000 – ₹15,000+ |
| Fire-Rated Flush Door | ₹8,000 – ₹20,000+ |
Readymade flush doors price tends to be lower than custom orders because they are manufactured at scale in standard sizes. If your frames fit a standard size, readymade is almost always the smarter buy — same quality, lower cost.
👉 Explore KPI Ply Flush Doors
Flush Door Price Per Sq Ft
Comparing doors by flush door price per sq ft is more useful than comparing per-door quotes, especially when sizes differ across suppliers.
| Door Category | Price Per Sq Ft (Approx.) |
| Hollow Core (Basic) | ₹35 – ₹70 |
| Solid Core (Block board / Particle board) | ₹90 – ₹160 |
| Waterproof / BWR Grade | ₹130 – ₹220 |
| Decorative Laminate Finish | ₹160 – ₹300 |
| Fire-Rated | ₹300 – ₹550 |
A standard 7×3 ft door is 21 sq ft. A solid core door at ₹120/sq ft works out to roughly ₹2,520 per door — before hardware. When comparing supplier quotes, always ask for the per sq ft rate.
Size-wise Flush Door Price (30mm, 32mm, 35mm)
Thickness affects both price and performance. Thicker doors are heavier, more rigid, and better at handling regular use.
30mm Flush Door Price
30mm flush door price in India ranges from ₹900 to ₹3,500 depending on core type and finish. These are the lightest flush doors — right for bathroom doors, toilet shutters, or storage room doors where heavy daily use isn’t expected.
Typical size: 6×2.5 ft or 7×2.5 ft Price: ₹900 – ₹3,500 per door
32mm Flush Door Price
32mm flush door price ranges from ₹1,500 to ₹5,500. This is the most common thickness for bedroom and living room doors in residential construction. The additional thickness gives better rigidity and a more solid feel when closing.
Typical size: 7×3 ft Price: ₹1,500 – ₹5,500 per door
35mm Thick Flush Door Price
35mm thick flush door price starts around ₹2,500 and goes up to ₹8,000 or more for premium finishes. Used for main entrance doors, office cabins, and doors that carry a heavy lock, door closer, or panic bar.
Typical size: 7×3 ft or 8×3.5 ft Price: ₹2,500 – ₹8,000+ per door
Read More – top 10 plywood manufacturers in India, Types of plywoods
Flush Door Design with Price
Flush doors are not just plain panels. The flush door design with price varies based on the surface treatment applied.
Plain Laminate Finish — Available in wood grain, solid colours, and textures. Most affordable decorative option. Price addition: ₹40–₹90 per sq ft over base door cost.
Membrane Press (PVC Foil) — A moulded finish that gives a 3D profile effect on a flat door. Looks like a panel door at flush door prices. Price addition: ₹60–₹120 per sq ft.
Veneer Finish — Real wood veneer for a natural wood look. Used in premium residential and hospitality projects. Price addition: ₹100–₹200 per sq ft.
Digital Print / Textured Finish — Custom patterns and prints on the door surface. Price varies based on design complexity.
For most homes, a good laminate finish on a solid core door is the most practical choice — looks clean, resists scratches, and doesn’t need upkeep.
Factors Affecting Flush Door Price
Core Type — Hollow core uses a honeycomb filler and is the cheapest. Solid core uses block board, particle board, or MDF — heavier and more durable.
Grade (BWR vs MR) — MR (Moisture Resistant) grade works for dry internal areas. BWR (Boiling Water Resistant) grade is for wet zones and exteriors. Waterproof flush door price is higher than MR grade because both the adhesive and timber used are more resistant to sustained moisture exposure.
Thickness — 30mm, 32mm, and 35mm each sit at different price points, as covered above.
Surface Finish — A plain hardboard face costs far less than veneer or membrane press.
Brand and ISI Certification — ISI-marked doors from established manufacturers cost more but the quality is verifiable. Unbranded doors often have inconsistent core density or weak adhesive bonding.
Size — Larger doors use more material. Custom sizes cost more than standard readymade sizes.
How to Choose the Right Flush Door
Match thickness to usage. Bathroom doors: 30mm. Bedroom doors: 32mm. Main doors and office entrances: 35mm minimum.
Check the grade for moisture. Any door near a bathroom, kitchen, or exterior wall needs BWR grade. MR grade in wet zones swells and delaminates within a couple of years. If in doubt, the waterproof flush door price is worth paying.
Go readymade where possible. Readymade flush doors price is considerably lower than custom orders, and production-line quality tends to be more consistent. Standard size frames almost never need custom doors.
Look for the ISI mark. IS 2202 covers wooden flush door shutters. That mark confirms the door has been tested for density, adhesive strength, and dimensional accuracy — not just that it looks fine on the surface.
Budget for hardware separately. Hinges, locks, closers, and stoppers add ₹500–₹3,000 per door. Factor this in before comparing total costs.
Conclusion
Flush door price in India runs from under ₹1,000 for a basic hollow core bathroom door to ₹15,000+ for a veneer-finish main entrance door. The right number for your project depends on where the door goes, how much load it carries, and how long you expect it to last.
KPI Ply manufactures flush doors with BWR-certified materials, consistent core density, and finishes tested for Indian climate conditions. Whether you need 32mm bedroom doors or heavy-duty 35mm main entrance shutters, the range is built for both residential and commercial use.
👉 Explore KPI Ply
What is the average flush door price in India? Flush door prices range from ₹800 to ₹15,000+ depending on core type, thickness, finish, and whether it’s waterproof or decorative
What is flush door price per sq ft in 2026? Flush door price per sq ft ranges from ₹35 to ₹550, depending on whether it’s hollow core, solid core, waterproof, or fire-rated.
Which flush door thickness is best for home use? 32mm is ideal for bedrooms, 30mm for bathrooms, and 35mm is best for main doors or heavy-use areas.
What is the price of waterproof flush doors? Waterproof (BWR grade) flush doors typically cost ₹3,500 to ₹9,000 per door, depending on size and finish.
Are readymade flush doors cheaper than custom ones? Yes, readymade flush doors are usually cheaper because they are mass-produced in standard sizes, offering better value for money.